UHP Water Blasting
WJA | NACE Member
JC International’s UHP Water Blasting equipment is a viable alternative to grit blasting with no cleanup costs, no dust and environmentally friendly.
JCI’s UHP equipment can remove extreme corrosion, epoxy paint, paint coatings, concrete etc. at high pressures and it’s the preferred method of surface preparation on offshore gas platforms and petrochemical plants. Our system utilizes water pressure up to 40,000 psi to transfer energy to a work surface.
Various adaptors can be fitted to enable pipe cleaning, tube bundle cleaning, concrete cutting and interval tank cleaning on or offshore.
We have built capacity for effective hydro blasting and painting service at both offshore and onshore location. We have a strong team for surface preparation, cement removal, coating removal, stripes removal, corrosion removal, concrete removal, etc. Beside the UHP, airless spray machine, we have mobile air compressors for timely drying of blasted surface in order to avoid oxidation.
By engaging JC International, you will enjoy good UHP cleaning service for the purpose of rust metal, boilers, tubular, heat exchanger, vessel decks and hulls cleaning. After cleaning, we are capable to coat surfaces in accordance to best practices.
This service involves the use of high pressure water for tank cleaning painting. storage, silo and bulk tanks
In some cases where bulk silo tanks have solidified waste that cannot be removed by high pressure cleaning, we apply biochemical to soften waste and carry out de-slugging.
Our riser cleaning service is engaged to clean debris from the riser safely.
It has become obvious that after the riser has been stored on the deck of the rig, on land or in a service yard for an extended period of time, the carbon steel lines to include the main tube start to corrode. There have been several incidents where the rigs have suffered extended downtime due to the internal corrosion of these lines. No one should assume that because the riser is coming from shore base, a service yard, new build facility or has been stored on the rig for an extended period of time, that the riser is ready to run. When it is known that section of riser has not been used for long periods of time, (no matter what the reason) the information should trigger an inspection of the internal areas of the carbon steel lines to insure they are ready for use. If they are found to be corroded, this procedure once followed, will have the riser ready for use whether it be run the next day or 6 month
Either with sand or hydro, our team has good experience in surface preparation even at difficult height.
We have strong capacity for robust sand blasting. The is use open surface preparation before coating
Casing, tubing, drill pipes, tanks, vessels and other asset that can grow scale and rust as a result of oxidation or chemical reactions; we offer comprehensive water jetting service and coating services. We have several barracuda that are apt for ID& OD cleaning of pipes of various diameters.
JC International has several high quality 40,000 psi diesel UHP machines designed for maximum reliability and simplicity. To avoid downtime, we stock good quantity of spare parts to use should the need parts replacement arise.
At JC International, we are good at boiler tube and pressure vessel cleaning. With our diesel-powered UHP machines, we are able to deliver thorough cleaning of your boilers at shortest downtime. Our water jetting team are good at determining the pound per square inch (psi) that is suitable for tubes. Members of our water jetting team are NDT inspectors and Rope Access Technicians and have proficiency conduct various NDT on your boilers even at height.
JC International is a corporate Member of NACE and the company is staffed with experienced corrosion management experts. We assist clients to develop Corrosion Management Policy with a view to achieving statutory compliance, reduce asset loss.
Other Ultra-High Pressure Hydroblasting Expertise:
- Boiler ‘Striping’ for NDT
- Epoxy Removal
- Heat Exchanger Cleaning
- Tanks and Pressure Vessels
- Paint Removal
- Process Lines and Reactors
- Scales and Cement Removal
- Tank and Pipe Demolition
- Weld Preparation For X-Ray
- Surface Preparations For Painting
- Reinforced Concrete Cutting
- Multiple Lance Evaporator Cleaning
- Vapor, Polymer, and Resin Lanes
Hydro Jetting Solutions
UHP Water Blasting
Heat Exchanger Cleaning
Process Lines Cleaning
Tanks & Vessels Cleaning